SSL – Structural Slab Level – the level at the top of the concrete slab.
What does SSL stand for construction?
SSL – Structural Slab Level – the level at the top of the concrete slab.
What is FFL construction?
A floor plan shows an overhead view of the floor plan. … The floor plans will also have the finished floor levels (FFL) on them so the builder knows how high above natural ground (NGL) the house is to be.
What is SSL in slab?
SSL (Structural Slab Level) is typically more used within the industrial and commercial markets and is very simply the level of which the structural concrete floor slab would finish, however the term SSL is only use if there was to be other finishes to be placed over the structural slab.What is structural slab level?
What is Structural Slab Level? The term SSL stands for structural Slab level refers to the top surface level of the structural slab. This term is mostly used in the commercial and industrial markets. The term SSL is used when another finishing is going to be placed over the structural slab.
What is FPL level construction?
FFE: Finished Floor Elevation. FA: Fire Alarm. FE: Fire Extinguisher. FPL: Fireplace.
What does AFFL stand for?
AcronymDefinitionAFFLAmerican Fantasy Football LeagueAFFLAbove Finished Floor Level (building plans)AFFLA Friend For LifeAFFLAnime Fanfiction Links
How is FFL measured?
The height of your slab relative to a datum, generally but not always Australian Height Datum (AHD). So if the land has a level of 30.50 m, and your FFL is 31.00 m then your slab is 0.50 m above the ground level.What is plinth level?
Plinth Level means the level of the floor of a building immediately above the surrounding ground.
What is SFL and FFL?Correct me if Iam wrong, FFL refers to the level at the top surface of floor finish. This is where all the building element finish levels are referenced from. SFL refers to the level at the top surface of the floor screeding or concrete topping. While SSL refers to the level at the top surface of the structural slab.
Article first time published onWhat is CL construction?
CL: Center LIne. CLG.: Ceiling. CMU: Concrete Masonry Unit. C.O.: Cleanout. Cont.: Continuous.
How thick is the floor?
The floor of one level of a home shares framing with the ceiling of the level below it. In a typical home, the entire structure between levels can be about 12 to 14 inches thick, depending on the type of joists used and the finish materials for the floor and ceiling.
What is the height of lintel level?
The height between the floor level and lintel level is known as lintel height. As per the building regulations and guidelines, For residential building the standard height of lintel should be 7feet (2.1m) and for the commercial buildings it is 7.5 feet (2.3 m) is adopted.
What is the plinth height?
Plinth height means the height of the ground floor/upper ground floor above the street level measured from the level of the centre of the adjoining street.
What is lintel beam?
A lintel or lintol is a type of beam (a horizontal structural element) that spans openings such as portals, doors, windows and fireplaces. It can be a decorative architectural element, or a combined ornamented structural item.
What does act mean in construction?
Acoustical Ceiling Tile. ACT. Advanced Concepts and Technology (US Army)
What is AFFL in drawing?
AFFL – Above Finished Floor Level.
What does RTB mean in the military?
RTB — Return to Base.
What is RA architect?
RA= Registered Architect. One can be a licensed architect meaning they have passed the national exam in a particular state; however, they must maintain their continuing education and pay the associated fees within the state to be registered and to practice architecture in the state that the project is located in…
What is FC concrete?
f’c is the specified compressive strength of concrete using standard cylinders of six inches diameter and twelve inches height. Usually this is prescribed at the age of 28 days.
What does FW mean on floor plan?
ABBREVIATIONMEANINGFCLFinished ceiling levelFFLFinished floor levelFLFloor level (note: the floor level is provided as a figure relative to a datum, or universal reference point)FWFloor waste
What is RCC & PCC?
Plain cement concrete (PCC) is simply concrete by definition. … Reinforced cement concrete (RCC) is PCC + reinforcement. The reinforcement is generally steel bars bent and laid into the desired shape and orientation. The reinforcement can be both tensile or compressive reinforcement depending upon the situation.
What are the 3 types of foundations?
Foundation types vary, but likely your house or home’s addition does or will have one of these three foundations: full or daylight basement, crawlspace, or concrete slab-on-grade.
What is FGL and NGL?
The confusion is that the level which we generally see is FGL(finished ground level) then to know NGL do we need to dig out the soil and check the hard stratum. Also is the use of columns in foundation dependent on this NGL.
How is FFL calculated in construction?
Locate the structural floor height specified in the flooring project plans. Add the combined height of the architectural floor material, substrates and adhesives to the structural floor height. This is the finished floor level.
What is FFL agent?
Welcome to Family First Life Agent Force Smart insurance planning delivers security, even if the unexpected comes to pass. Family First Life Agent Force is committed to helping our clients find the policies that fit their needs, and helping our agents find a career that helps build their future.
What is finished floor?
A finish floor (also known as floor covering) is the top layer of flooring. In other words, it is the layer that you walk on, and it is typically quite decorative layer compared to the layers of flooring beneath it. Floor coverings can include carpets, laminate, tile, rugs, and vinyl.
What is first floor elevation?
Analysis of Structure Data to Develop First Floor Elevations 1 FFH is defined as the difference between a structure’s FFE and lowest adjacent grade.
What is FF elevation?
Also referred to as FF is Finished Floor Elevation. The term FFE refers to the top of the structural slab and its elevation above sea level. FG. Finished grade. The term FG refers to the elevation above sea level for the finished grade or finished ground.
What does GL stand for in construction?
GIS – Geographical Information System. GL – Ground Level.
What do the FFL numbers mean?
An FFL number is a unique identifying number assigned to every Federal Firearms License issued by the ATF. In addition to identifying FFLs, the FFL number also shares some information about the FFL (like the Type of FFL, the expirations date, and more).
